
TRUCK BODY
FREQUENTLY ASKED QUESTIONS.
Straight answers about our custom truck bodies — sizes, GRP sandwich panels, refrigeration units, repairs and getting a quote.
What truck bodies does Evermount manufacture?
Evermount designs and manufactures custom dry freight truck bodies, refrigerated truck bodies, cutaway bodies and flat decks at our Abbotsford, BC facility. Standard body lengths run 10–20 ft, with custom lengths, widths and heights available.
What are GRP sandwich panels?
Our bodies are built from GRP-faced, high-density PU foam sandwich panels. The construction is lighter than traditional aluminum/plywood bodies and resists rot, UV and chemicals — built for BC weather and road salt. Benefits include higher payload, lower fuel use and lower maintenance.
Do you supply the refrigeration unit?
No — the refrigeration unit is supplied by the customer. We manufacture the insulated body and coordinate integration with your cooling equipment, including multi-zone frozen, chilled and ambient configurations.
What sizes are available?
10–20 ft is our standard range, 8 ft wide and high as standard, with custom lengths, widths and heights available.
Do you repair and service truck bodies?
Yes. We service roll-up door components, install, repair, maintain and replace liftgates, repair reefer-body panels, insulation, doors and seals, and handle floor, wall, roof and interior repairs — including bodies built by other manufacturers. We do not service refrigeration units themselves.
How do I get a quote?
Use the Request a Quote form on our website, email sales@evermount.ca or call Sales at +1 (250) 885-9335. Tell us your chassis, body length and application and we will recommend a configuration.
Where are you located and which areas do you serve?
We are at 30970 Wheel Ave, Unit 407, Abbotsford, BC, serving the Fraser Valley, the Lower Mainland and businesses across British Columbia.
What are the dimensions of a dry freight truck body?
External sizes (L × W × H) are 10 × 7.5 × 7.5 ft, 12 × 7.5 × 7.5 ft, 14 × 8 × 8 ft, 16 × 8 × 8 ft, 18 × 8 × 8 ft and 20 × 8 × 8 ft. Internal sizes are 9.8 × 7.3 × 7.3 ft (10 ft), 11.8 × 7.3 × 7.3 ft (12 ft) and 13.8 / 15.8 / 17.8 / 19.8 × 7.8 × 7.8 ft for the 14, 16, 18 and 20 ft bodies.
How much does an Evermount truck body weigh?
Approximate dry freight body weights are 780 kg (10 ft), 900 kg (12 ft), 1,120 kg (14 ft), 1,360 kg (16 ft), 1,550 kg (18 ft) and 1,700 kg (20 ft). Approximate refrigerated body weights are 940 kg, 1,075 kg, 1,300 kg, 1,750 kg, 1,850 kg and 2,050 kg for the same lengths.
What insulation do your refrigerated bodies use?
Refrigerated bodies use 100 mm thick XPS in the floor (38 kg/m³) and PU foam (45 kg/m³) in all other panels. Floor and roof panels are 120 mm thick and the remaining panels 100 mm. Internal sizes run from 9.3 × 6.8 × 6.8 ft (10 ft) to 19.34 × 7.34 × 7.34 ft (20 ft).
What comes standard on a dry freight or refrigerated body?
A Maclaren roll-up rear door (1″ lightweight PVC on dry freight; 2″ PVC with insulation on refrigerated), a powder-coated stainless steel rear door frame, motion-sensor LED interior lighting, DOT-approved exterior lights and reflective decals, a galvanized bolted sub-frame with connection brackets, a chequered aluminum rear bumper/step, PVC mud flaps and one set of E-track. Refrigerated bodies add a floor drain assembly.
Do you build truck bodies for Alberta?
Yes. Evermount builds dry freight (dry van) and refrigerated truck bodies in Abbotsford, BC for buyers in British Columbia and Alberta, including Calgary and Edmonton. See our Alberta truck bodies page or request a quote.